GE Medical Systems marquette Dash 2000, Operator'S Manual, Page: 80 / 272

3-16 Dash 2000 Patient Monitor Revision C
2005873-001
About Discharging
Discharge Patient
Standard and Rover
Admit Menu
WARNING
DISCHARGE TO CLEAR PATIENT DATA—When admitting a
new patient, you must clear all previous patient data from the
system. To accomplish this, disconnect patient cables, then do
a discharge.
When it is no longer necessary to monitor a patient, a discharge procedure
must be done to clear the system of all patient data collected. Monitor
defaults are always recalled when a discharge is done. The last unit name
and bed number used are retained. Patient name is cleared.
To discharge a patient, select MORE MENUS. Depending on how your
monitor is set up, you will see one of two menu options—DISCHARG
PATIENT or NEW CASE.
This menu option indicates that the patient is admitted. You select it to
discharge the patient.
To discharge a patient from the Standard and Rover admit menu follow
this procedure:
1. Select MORE MENUS.
2. Select ADMIT MENU to display the Admit Menu.
3. Select DISCHARG PATIENT option from the Admit Menu. A popup
menu opens.
MAIN
MENU
DISCHARG
PATIENT
PREV.
MENU
DISCHARGE
042A
ADMITTED >
Standard and Rover Popup Menu to Discharge
4. Disconnect all patient cables.
5. Rotate the Trim Knob control to move the pointer to DISCHARG.
6. Press the Trim Knob control. The message ”DISCHARGED” appears at
the top of the display and all data is cleared from the system.