manualshive.com logo in svg

GE Medical Systems marquette Dash 2000, Operator'S Manual, Page: 231 / 272

Share
Download
GE Medical Systems marquette Dash 2000 Operator'S Manual Download Page 231

 

 

Revision C 

Dash 2000 Patient Monitor 

12-11 

 2005873-001 

Size 

 
 
 
 
 
 
 
 
 

Auto Size 

 
 
 
 
 

Manual Size 

 

The size of the waveform can be changed manually or automatically. To 

perform this operation, follow this procedure: 
1.  Select SIZE option from the Respiration Menu; a new set of menu 

options is displayed. 

MAIN

MENU

AUTO

SIZE

MANUAL

SIZE:

4X

PREV.
MENU

129

 

Respiration Size Menu 

2.  Select either AUTOSIZE or MANUAL SIZE option. 
 
 
NOTE:  The size of the waveform has no effect on the detection capability 

of the program. 

During the learning process, the displayed waveform is automatically sized to 
fit a predetermined area of the screen.  During monitoring, the size may have 
been changed manually (see below).  Select AUTO SIZE option to 
automatically resize the waveform to fit the predetermined area.  This is a 
direct action menu option. 

 

If desired, you can manually change the size of the respiration waveform. 

1.  Select MANUAL SIZE option from the Respiration Size Menu.  A popup 

menu opens displaying the choices available. 

MAIN

MENU

MANUAL

SIZE:

4X

10X

9X
8X
7X
6X

5X

3X
2X
1X

PREV.
MENU

129A

4X

 

MANUAL SIZE Popup Menu 

2.  Rotate the Trim Knob control to highlight another size.  

The change will 

occur immediately.

 

3.  When you are satisfied with the size, press the Trim Knob control to 

close the popup menu. 

NOTE:  The manual size you select will be cancelled if you change the lead 

from which respiration is derived.  When you change leads, the 

learning process is started and the waveform is automatically 

sized. 

 
 
 

Summary of Contents for marquette Dash 2000

















































































































































































































































































Reviews:

No comments