GE Medical Systems marquette Dash 2000, Operator'S Manual, Page: 71 / 272

Revision C Dash 2000 Patient Monitor 3-7
2005873-001
Combo Admit Menu
With the Combo application, the monitor is permanently assigned to a
room, and you have the ability to obtain patient ECG data from a monitor
or from a telemetry transmitter.
NOTE: A room must have network cable in order to use telemetry.
The unit name and bed number are assigned during installation. The
options you may need to adjust/enter are shown in the admit menu below.
MAIN
MENU
ADMIT
INFO
XXX
PATIENT
PREV.
MENU
ECG
SOURCE:
MONITOR
029
ICU Admit Menu—Combo Application
NOTE: XXX=ADMIT if patient is discharged, DISCHARG otherwise.
NOTE: It is not likely that this application is used when the monitor is set
for Operating Room mode. However, the admit menu would look
just like this one.
ECG SOURCE—choose either the monitor or a telemetry transmitter from
which to receive the patient’s parameter data.
ADMIT INFO—opens the admit information window and popup menu;
refer to section Admit Info later in this chapter.
ADMIT PATIENT–a direct action menu option that admits the patient.
DISCHARG PATIENT—opens a popup menu to confirm the discharge of
the patient.
Refer to this chapter, Admit Menu Options, if you need more details on
these menu options.