GBC FusionPunch II, Service Manual

Page: 21 / 430

System Checks
GBC FusionPunch II Service Manual
12/2003
1-17
Table 1-7 Test Mode Checkout.
Punch Component Normal Operation Corrective Action
Document Transport Motor The Document Transport Timing Belt
moves smoothly without excessive noise. Go to ADJ 4.1 Document
Transport Main Timing Belt
Adjustment
Punch Motor The Die Pins move up and down. Go to Quality RAP 5.6
and ADJ 4.4 & 4.5.
Back Gauge Solenoid The Back Gauge Solenoid actuates three
times each second. Go to Quality RAP 5.4
or Quality RAP 5.7
Punch Clutch The Punch Clutch actuates three times
each second. Go to Quality RAP 5.6
and ADJ 4.4 & 4.5
Stacker Tappers The Stacker Tappers actuate three times
each second. Go to Quality RAP 5.5
Offset Solenoids The Offset Solenoids actuate alternately
each second. Go to Quality RAP 5.3
Stacker Tray Motor If the Stacker Tray is in the maximum
vertical position, the Tray Motor lowers the
Tray one position a second when the Upper
Switch is deactivated. Go to RAP 5.3
Stacker Bypass Motor (if
installed) The Stacker Bypass Motor drives the
Stacker Bypass Assembly Belt. Go to RAP 1.2 AC Power to
the Stacker.
Stacker Bypass Gate
Solenoid (if installed) The Stacker Bypass Gate Solenoid
energizes to direct sheets to the Stacker. It
de-energizes to direct sheets to the Stacker
Bypass. Go to RAP 5.4 Stacker
Bypass Jams.