![background image](http://html.mh-extra.com/html/gbc/fusionpunch-ii/fusionpunch-ii_service-manual_571157047.webp)
RAP 3.2 Stacker Interlock Switches
GBC FusionPunch II Service Manual
12/2003
2-23
6.
The table below contains information for
Stacker 1 and Stacker 2. Depending on
your configuration, use the information in
the table to check the continuity of the
cable between the Stacker 1 or Stacker 2 I/
O PWB and the Punch Daughter PWB with
which it corresponds.
* If two Stackers are installed, this
connector will be P24B.
The continuity is OK.
Y
N
Replace the cable between the
Stacker I/O PWB and its
corresponding Daughter PWB (PL
6.2A).
Replace the Little Star Controller PWB (PL
3.1).
7.
The table below contains information for
Stacker 1 and Stacker 2.
Using the information in the table,
disconnect P/J 19 on the Stacker 1 or
Stacker 2 I/O PWB. Check the
corresponding I/O PWB LED to see if it is lit
when the connector is disconnected.
NOTE: In this step, you are checking
to see if the LED remains LIT when the
P/J is disconnected, NOT flashing.
The LED corresponding to the suspect
interlock remains lit when P/J 19 is
disconnected.
Y
N
Leave the connector disconnected
and go to Step 8.
Leave the connector disconnected and go
to Step 9.
8.
The table below contains information for
Stacker 1 and Stacker 2. Depending on
your configuration, use the information in
the table to check the continuity of the
cable between the Stacker 1 or Stacker 2
I/O PWB and the Punch Daughter PWB
with which it corresponds.
* If two Stackers are installed, this
connector will be P24B.
The continuity is OK.
Y
N
Replace the faulty harness (PL 6.2A).
Depending on the problem Stacker,
replace Daughter PWB 1 or Daughter
PWB 2 (PL 3.1).
9.
The table below contains information for
Stacker 1 and Stacker 2. Using the
information in the table, place a jumper
between the signal input on J19 and the 0
VDC pin on J19 on Stacker 1 or Stacker 2.
With the jumper in place, the corresponding
Punch I/O PWB LED should extinguish.
Interlock
Check
Stacker 1
Top Cover
Stacker 1 I/O P24A-INA6*
to Punch Daughter PWB 1
P24-6
Stacker 1
Front Door
Stacker 1 I/O P25-INB1 to
Punch Daughter PWB 1
P25-1
Stacker 2
Top Cover
Stacker 2 I/O P24A-INA6 to
Punch Daughter PWB 2
P24-6
Stacker 2
Front Door
Stacker 2 I/O P25-INB1 to
Punch Daughter PWB 2
P25-1
Interlock
LED
Stacker 1 Top Cover
Stacker 1 I/O PWB
LIA6
Stacker 1 Front Door
Stacker 1 I/O PWB
LIB1
Stacker 2 Top Cover
Stacker 2 I/O PWB
LIA6
Stacker 2 Front Door
Stacker 2 I/O PWB
LIB1
Interlock
Check
Stacker 1
Top Cover
Stacker 1 I/O P24A-INA6*
to Punch Daughter PWB 1
P24-6
Stacker 1
Front Door
Stacker 1 I/O P25-INB1 to
Punch Daughter PWB 1
P25-1
Stacker 2
Top Cover
Stacker 2 I/O P24A-INA6 to
Punch Daughter PWB 2
P24-6
Stacker 2
Front Door
Stacker 2 I/O P25-INB1 to
Punch Daughter PWB 2
P25-1
Interlock
Jumper
Between
J 19 Pins
LED
Stacker 1
Top Cover
Stacker 1 I/O
J 19
0V and INA6
Stacker 1 I/O
LIA6
Stacker 1
Front Door
Stacker 1 I/O
J 19
0V and INB1
Stacker 1 I/O
LIB1
Stacker 2
Top Cover
Stacker 2 I/O
J 19
0V and INA6
Stacker 2 I/O
LIA6
Interlock
Check
Summary of Contents for FusionPunch II
