![background image](http://html.mh-extra.com/html/gbc/fusionpunch-ii/fusionpunch-ii_service-manual_571157055.webp)
RAP 4.2 Punch Jam Sensors
GBC FusionPunch II Service Manual
12/2003
2-31
NOTE: In this step, you are checking
to see if the LED remains LIT when the
P/J is disconnected, NOT flashing.
The LED corresponding to the suspect
sensor remains lit when its I/O PWB
connector is disconnected.
Y
N
Leave the connector disconnected
and go to Step 5.
Leave the connector disconnected and go
to Step 6.
5.
Using the information in the following table,
check continuity of the cable between the
P25 pin corresponding to the sensor and
the P3 pin corresponding to the sensor.
There is continuity between these two
points.
Y
N
Replace the harness (PL 6.1A).
Replace the Little Star Controller PWB (PL
3.1).
6.
Using the information in the following table,
place a jumper between the signal input
and the 0 VDC pin. With the jumper in
place, the corresponding Punch I/O PWB
LED should extinguish.
.
With the jumper in place, the corresponding
Punch I/O PWB LED extinguishes.
Y
N
Replace the Punch I/O PWB (PL 3.1).
Leave the connector disconnected and go
to Step 7.
7.
Check for +24 VDC between the 0 VDC pin
and the +24 VDC pin on the disconnected
jack.
There is +24 VDC at this point.
Y
N
Replace the Punch I/O PWB (PL 3.1).
Check the harness between the sensor
and its plug on the Punch I/O PWB. If the
harness is OK, replace the sensor
(Entrance - PL 4.1A, Document Transport
1 and 2 - 4.2A, Punch - 4.3A, Exit - 4.3D).
Sensor
I/O PWB
P/J
I/O PWB
LED
Entrance
P/J 11
LIB4
Document
Transport 1
P/J 10
LIB5
Document
Transport 2
P/J 9
LIB6
Punch
P/J 2
LIB7
Exit
P/J 1
LIB8
Sensor
Check
Entrance
P25-INB4 to P3-13
Document
Transport 1
P25-INB5 to P3-12
Document
Transport 2
P25-INB6 to P3-11
Punch
P25-INB7 to P3-10
Exit
P25-INB8 to P3-9
Sensor
I/O PWB
Jack
Jumper
Between
Pins
I/O PWB
LED
Entrance
J 11
0V and
INB4
LIB4
Document
Transport 1
J 10
0V and
INB5
LIB5
Document
Transport 2
J 9
0V and
INB6
LIB6
Punch
J 2
0V and
INB7
LIB7
Exit
J 1
0V and
INB8
LIB8
Summary of Contents for FusionPunch II
