GBC FusionPunch II, Service Manual

Page: 287 / 430

Host Machine Enablement (DocuSP)
GBC FusionPunch II Service Manual
12/2003
6-15
Host Machine Enablement (DocuSP)
Creating DocuSP
(DocuTech 61xx & DocuColor iGen3)
Profiles and Print Queues
What is a Profile?
A profile is a set of values, or system configuration parameters, that are
entered into the printer’s operating system from the keyboard. A profile
allows the printer to communicate effectively with the FusionPunch II and
its stacker (or multiple stackers). Each model of printer has its own
unique profile. For example, the profile for a DocuTech 135 is different
than the profile for a DocuTech 6100.
What is a Print Queue?
A Print Queue is also a set of values, or system configuration parameters,
that communicates input and output information from the printer to a
finishing device. The FusionPunch II is a finishing device.
System Access for Setup
Profile and Print Queue configuration is performed at the same time and
is normally the responsibility of the System Administrator. The following
information is provided for use by the System Administrator for the
purpose of creating profiles and print queues for the system.
DocuSP 1.4.xxx to 2.xxx Log On
.
1. Check the logon level in the DocuSP Print Services Screen, as shown
below. If you are already logged in as System Administrator, go to
Step 2. If not, log on as System Administrator, as described below.
Figure 6-9 DocuSP Monitor Screen
a) Go to the DocuSP Print Services screen, as shown in Figure 6-9.
DocuSP Print
Services
Screen
Logon
Level