GBC FusionPunch II, Service Manual

Page: 120 / 430

GBC FusionPunch II Service Manual
REP 5.7 Rubber Drive Rollers
12/2003
4-24
REP 5.7 Rubber Drive Rollers
Parts List: 5.2 C
WARNING
Switch off the Main Power.
Disconnect the power cord.
Removal
1. Perform REP 5.5 Bypass Motor and Timing
Belt, Steps 1 to 4.
2. Remove the Bypass Flat Belt from the 2
Idler Rollers.
3. Make a mark on the Drive Shaft next to the
Clamp Collar (Figure 1).
4. Loosen:
4.1 the 2 Allen screws in the Timing Belt
Pulley (Figure 1).
4.2 the 3 Allen screws in the 3 Rubber
Drive Rollers (Figure 1).
4.3 the 2 Allen screws in the 2 Clamp
Collars (Figure 1).
5. Remove:
5.1 the Timing Belt Pulley (Figure 1).
5.2 the E-ring (Figure 1).
6. Slide the Drive Shaft towards the front of
the machine.
7. Clean the Idler Rollers with Isopropyl
alcohol.
Replacement
1. Reinstall the parts in the reverse order.
2. Perform ADJ 5.5 Bypass Motor Timing Belt Tension.
CLAMP
COLLARS (2)
E-RING MARK THE DRIVE SHAFT
RUBBER DRIVE
ROLLERS (3)
TIMING BELT
PULLEY
Figure 1.