GBC FusionPunch II, Service Manual

Page: 132 / 430

GBC FusionPunch II Service Manual
ADJ 5.5 Bypass Motor Timing Belt Tension
12/2003
4-36
ADJ 5.5 Bypass Motor Timing
Belt Tension
Purpose
To prevent the Bypass Motor Timing Belt from
wearing down and / or damaging the Bypass
Motor.
Check
• Check that the Bypass Motor Timing Belt
operates smoothly and deflects 0.10 in. (2-3
mm).
• Check the alignment of the Bypass Motor
Pulley and the Timing Belt Pulley.
Adjust sequence
1. Perform REP 5.5 Bypass Motor and Timing
Belt, Steps 1 to 3.
2. Slide the Bypass Motor up or down until the
Bypass Motor Timing Belt deflects 0.10 in.
(2-3 mm).
3. Tighten the 4 Hex Nuts.
Figure 1.
HEX NUTS (4)