Fujitsu ScanSnap iScanner fi-6010N, Operator'S Manual

Page: 642 / 665

604
7A040014 Backup file already exists. A file or folder exists in the backup folder.
Specify an empty folder.
If a folder which does not exist is specified,
it will be created.
7A040015 Backup folder specification is
invalid. This error message is output in the
following cases. After checking the error,
run the command again.
z The backup folder specified in the
parameter for the restore command does
not have write access.
z The specified backup folder name
already exists as a file.
z The backup file full path is longer than
128 bytes.
7A040016 Server is busy. Try again later. This message appears if the backup/restore
command is executed during an update call
on the Central Admin Server.
Wait until the update call is finished, and
try again.
7A040017 Backup failed. If this message appears with auxiliary code
[7A041012], free disk space may be
insufficient. Ensure that there is enough
free disk space available, and try again.
If this message appears with auxiliary code
[7A041015], it is possible that the database
file used in the Central Admin Server is
being used with a software other than the
Central Admin Server software. Stop using
the database file and try again.
If this message appears without auxiliary
code, the contents of the problem are
shown in the following format.
...
Problem details
...
If this message appears frequently with
auxiliary code other than those mentioned
above, contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner
service provider.
Code Message Action