Fujitsu ScanSnap iScanner fi-6010N, Operator'S Manual

Page: 289 / 665

5.6 Setting the Central Admin Server
fi-6010N Network Scanner Operator's Guide 251
5
z iScanner Shared Folder Service Port Number
Enter the port number to be used by the iScanner Shared Folder Service.
The default value is the port number which was specified at the time of installation (the
default value at installation is 30444).
The value can be specified within the range of 1024 to 65535.
■
Software Update Time-Period Restrictions
Set whether to automatically update the scanner system, security, installed options, and Add-ins
using the Central Admin Server.
z
Always allow
Always allow updates.
z
Never allow
Never allow updates.
z
Only allow in the following time period
Only allow updates within a restricted time period. Set the restricted time period with the
[Start] and [End] fields.
ATTENTION
When Central Admin Server software is installed in the Windows 2000
Server, "SharePoint Server Connection Settings" cannot be set.
HINT
When no SharePoint folders are used, stopping the iScanner Shared
Folder Service causes no problems.
HINT
z When an update is available for both systems (security and installed options
included) and Add-ins, if the update of systems is completed outside the speci-
fied time-period, update is not run for Add-ins.
z The length of time required for a software update can be estimated as follows:
Example: the following update case should be estimated as:
15 × 40 ×1.5 = 900 seconds (15 minutes)
1
z Update module size: 15 MB
z Number of scanners: 40
z Network throughput: 8 Mbps = 1 MB/s
Update module size × No. of target scanners × 1.5
Network throughput