Fujitsu ScanSnap iScanner fi-6010N, Operator'S Manual

Page: 588 / 665

550
Others An error has occurred. The system
must be restarted. Any buffered jobs
will be canceled. If problem persists,
the administrator should contact a
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider for help.
[alphanumeric eight digits] If the problem persists, the
administrator should contact a
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider.
An error has occurred. The system
must be restarted. Any buffered jobs
will be canceled. After restarting the
system, if the same error occurs, it
may be due to a scanner failure. In this
case, remove any documents that have
been fed into the scanner, disconnect
and reattach the power cord, and
restart the system again. If problem
persists, the administrator should
contact a FUJITSU scanner dealer or
an authorized FUJITSU scanner
service provider for help.
[alphanumeric eight digits] If the problem persists, the
administrator should contact a
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider.
An error has occurred. Try turning the
power off and back on again. If the
problem reoccurs after restarting, try
disconnecting the scanner power cord,
reattaching it, and restarting again. If
the problem still persists, the
administrator should contact the
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider for help.
[alphanumeric eight digits] Turn the scanner power off. After
the power turns off, disconnect the
AC cable from the scanner. Wait
for at least 10 seconds, then
reconnect the AC cable and turn
the power back on again. If the
error status persists, contact your
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider.
Screen Message Action