Fujitsu ScanSnap iScanner fi-6010N, Operator'S Manual

Page: 592 / 665

554
11040005 Insufficient free space in the
designated network folder. Ensure the free space requirements are
met, and try again.
11080001 Number of user data stores has
reached the maximum allowed.
New users may not login until
the old user data stores are
deleted. To have the user data store cleared, contact
a system administrator.
Clearing the user data store is not an
undoable action.
"Clearing the User Data Store" (page 170)
11090001 Application could not be
started. System restored to last
known good state. Contact a
system administrator. System or user settings were restored at
system restart.
Contact a system administrator.
The administrator should check the restored
system or user settings.
110B0001 Search has timed out. Contact a
system administrator. Contact a system administrator to check
the time of the search timeout.
"4.7.8 Setting the Login LDAP Server"
(page 100)
110B0002 Not connected to the network. Check that the system network is
functioning normally by performing a ping
test from another machine in the network,
other than from a machine in the same
server as network printer. If the system
network is not operating properly, refer to
"Failure to connect to a server using its IP
address" (page 463)
for further solutions.
110B0004 LDAP server is busy. Try the following:
z Contact a system administrator to have
the network settings checked.
"8.3 Network Connection
Troubleshooting" (page 458)
z Contact a system administrator to have
the server status checked.
110B0100 LDAP server response error. Try the following:
z Contact a system administrator to check
whether the LDAP server is available.
z Enter a valid user name and password.
110B0101 LDAP server access failed.
Check that the LDAP access
settings and LDAP server
settings are correct. Try the following:
z Contact a system administrator to check
whether the LDAP server is available.
z Enter a valid user name and password.
Code Message Action