Fujitsu ScanSnap iScanner fi-6010N, Operator'S Manual

Page: 626 / 665

588
System
Updates File format is not valid. Specify a valid file.
Specified file does not exist or is
empty. Specify a valid update file. The
error may also occur if the
authority to access the file does not
exist.
A date/time within one month from
now must be specified. Specify a valid update call date/
time.
A date/time within one month from
now must be specified. Enter a valid date/time.
File must be specified. Specify a file, and try again.
The same or a newer system update
has already been uploaded. No action required.
The same Add-in install module has
already been uploaded. No action required. However, to
upload the same version of the
Add-in install module again, first
cancel the currently uploaded file.
Scanner
Settings/
Job Mode
Settings Cannot open the Setting window.
It may be being accessed by another
user. Another user may be editing job
mode settings or scanner
configuration settings. Wait the
other user to finish the operation,
and try again.
Import
Scanner
Settings Specified scanner settings file could
not be found or could not be uploaded. Try the following:
z Check the scanner settings to be
imported.
z Try importing again.
z Check that a network error did
not occur while processing the
import, and that the status of the
network is "transmitting".
Scanner settings could not be
imported. Specified file contains
unsupported data. The system versions of the import
target scanner and import source
scanner are incompatible.
Update the target scanner's system
software.
"4.10.3 Updating the Scanner's
System Software" (page 175)
Screen Message Action