Fujitsu ScanSnap iScanner fi-6010N, Operator'S Manual

Page: 608 / 665

570
13060001 Scanner initialization has
failed. Try turning the power
off and back on again. The
administrator should contact the
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider for help Try the following:
z Check that the cables are connected to
the scanner properly.
z If the scanner does not restart
automatically, press the [Shutdown]
button on the "Login" screen to turn the
power off, and turn the power back on
again to restart the scanner.
z If the error status persists after the
scanner is restarted, press the
[Shutdown] button on the "Login"
screen, disconnect the AC cable and try
turning the power back on again. If the
error status persists, contact your
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider.
1306001A
1306001D
1306002C Insufficient memory. Try
turning the power off and back
on again. If problem persists,
the administrator should contact
the FUJITSU scanner dealer or
an authorized FUJITSU scanner
service provider for help. System might be unstable.
Shutdown and press the startup button to
restart the scanner.
If the error status persists, contact your
FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
1314002C Insufficient memory. Try
turning the power off and back
on again. If problem persists,
the administrator should contact
the FUJITSU scanner dealer or
an authorized FUJITSU scanner
service provider for help. Reduce the size of the scan data or set a
lower resolution level, and try again.
13061001 Scan error occurred.
File name:
XXXX
Error code: XXXX
Shutdown and press the startup button to
restart the scanner.If the error status
persists, contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner
service provider.
13061002
13061003
Code Message Action