Fujitsu ScanSnap iScanner fi-6010N, Operator'S Manual

Page: 572 / 665

534
Scanning When the file format is [MTIFF], the
maximum file size for the total
scanned data is 2GB. If the size of the
scanned data exceeds 2GB, no MTIFF
files can be created. Try the following:
z Delete scanned pages from
Scan Viewer until the total file
size of the scanned data is less
than 2GB.
z Increase the compression level
and try scanning again.
Scanning with the carrier sheet failed.
Make sure the document is fully
inserted into the top of the carrier sheet
and the folded edge is on the side
marked with the thick line, then try
again. If the problem persists, the
administrator should contact the
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider for help. Make sure the document is fully
inserted into the top of the Carrier
Sheet and the folded edge is on the
side marked with the thick line,
then try again. If the problem
persists, the administrator should
contact the FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider for help.
Roller
Cleaning Scanner top cover is closed. Open the
cover and try again. Open the top cover to clean the
feed rollers, and try again. For
details, refer to
"7.2.1 Cleaning the
ADF" (page 427) .
Press the keyboard [C] key to step the
feed rollers forward. Press the [OK]
button after the feed rollers have been
cleaned. Clean the rollers, and then press
the [OK] button.
Shutdown Shutdown will occur after all jobs
finish. Please wait... Operations cannot be carried out
while the scanner is shutting down.
The scanner will shutdown
automatically. Please wait.
Scan Test Document not found. Load a
document into the ADF, making sure
the side guides are adjusted correctly
and try again. Load the document into the ADF
paper chute, and try again. Load
the document to prevent any space
between the side guides and the
edges of the documents.
For details, refer to
"6.1 Loading
Documents" (page 298) .
Screen Message Action