276
Upgrade and Maintenance Manual
BX924
S3
System board components
Ê
Close the server blade as described in section
"Closing the server blade" on
page 61
.
Ê
Reinstall and secure the server blade in the system unit as described in
section
"Installing the server blade in the system unit" on page 62
.
Ê
If applicable, close the rack door as described in section
"Closing the rack
door" on page 67
.
Ê
Update the system board BIOS and iRMC to the latest version as described
in section
"Updating or recovering the system board BIOS and iRMC" on
page 80
.
Ê
When iSCSI boot is used via onboard CNA, the Onboard CNA OpROM has
to be enabled in the system board BIOS. If applicable, proceed as described
in section
"Enabling Option ROM scan" on page 88
.
Ê
If applicable, activate TPM functionality in the system BIOS under
Security
>
TPM (Security Chip) Setting
>
Security Chip
. For more information, refer to the
"D3143 BIOS Setup Utility for PRIMERGY BX924 S3" reference manual.
Ê
Verify and update time settings as described in section
"Verifying the system
time settings" on page 94
.
Ê
Inform the customer about changed WWN and MAC addresses. For further
information, refer to section
"Looking up changed MAC / WWN addresses"
on page 100
.
Ê
After replacing the system board in a server blade running Linux OS, update
the MAC address of the onboard network controller in the related NIC
definition file as described in section
"Updating the NIC configuration file in
a Linux environment" on page 97
.
Ê
Enable boot watchdog functionality as described in section
"Enabling boot
watchdog functionality" on page 92
.
Ê
If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
"Enabling
BitLocker functionality" on page 99
.
Ê
If applicable, restore LAN teaming configurations as described in section
"After replacing the server blade" on page 103
.
Ê
Please observe the notes on RAID rebuild in section
"Performing a RAID
array rebuild" on page 100
.
Summary of Contents for PRIMERGY BX924 S3
