Fujitsu PRIMERGY BX924 S3, Upgrade And Maintenance Manual

Page: 84 / 290

84 Upgrade and Maintenance Manual
BX924 S3
Basic software procedures
iRMC recovery procedure
The iRMC recovery is performed via the
FlashDisk
menu executed from a
bootable USB memory stick. For detailed information refer to the "Integrated
Remote Management Controller" user guides available online at
http://manuals.ts.fujitsu.com or from the ServerView Suite DVD 2 supplied with
your PRIMERGY server.
I
For the Japanese market, follow the instructions provided separately.
Ê
Shut down the server blade as described in section "Shutting down the
server blade" on page 54 .
Ê
Connect the monitor, keyboard, mouse and the bootable USB memory stick
to the port on the front of the server blade using the Y cable, see the
Operating Manual.
Ê
Switch on the server blade while as described in section "Switching on the
server blade" on page 65 to boot from the USB memory stick.
After completion of the boot operation, the FlashDisk menu opens.
Ê
Select Recovery _L to carry out the recovery flash for firmware image 1 (low
firmware image).
Ê
Select Recovery _U to carry out the recovery flash for firmware image 2 (high
firmware image).
Ê
Once the update operation has been completed, click on Exit , to close the
FlashDisk menu.
Ê
Shut down the server blade as described in section "Shutting down the
server blade" on page 54 .
Ê
Remove the Y-cable.
Ê
Switch on the server blade as described in section "Switching on the server
blade" on page 65 .
Ê
You can now put the server blade back into operation.