![background image](http://html.mh-extra.com/html/fujitsu/primergy-bx924-s3/primergy-bx924-s3_upgrade-and-maintenance-manual_121030058.webp)
58
Upgrade and Maintenance Manual
BX924
S3
Basic hardware procedures
4.4.3
Concluding steps
V
Note on network settings recovery
When replacing network controllers or onboard CNA, network
configuration settings in the operating system will be lost and replaced
by default values. This applies to all static IP address and LAN teaming
configurations.
Ensure to note down your current network settings before replacing the
controller.
Ê
Insert the server blade in the system unit see section
"Installing the server
blade in the system unit" on page 62
.
Ê
Restore the BIOS settings as described in section
"Restoring BIOS settings"
on page 85
Ê
Restore the iRMC settings as described in section
"Restoring iRMC
settings" on page 85
.
I
In order to enable ServerView Operations Manager and ServerView
Installation Manager to identify the system, it is necessary to program the
chassis ID prom using the "ChassisIDProm Tool" after installing the new
Server Blade.
4.5
Removing a server blade
V
CAUTION!
For safety information, please refer to chapter
"Important information" on
page 31
.
4.5.1
Preliminary steps
Ê
If applicable, open the rack door as described in section
"Opening the rack
door" on page 53
.
Ê
Shut down and power off the server blade as described in section
"Shutting
down the server blade" on page 54
.
Summary of Contents for PRIMERGY BX924 S3
