![background image](http://html.mh-extra.com/html/fujitsu/primergy-bx924-s3/primergy-bx924-s3_upgrade-and-maintenance-manual_121030227.webp)
BX924 S3
Upgrade and Maintenance Manual
227
Processors
9.5.4
Removing processor heat sinks
I
The following procedure is identical for the heat sinks of both CPUs.
Figure 96: Removing the processor heat sink (A)
Ê
Loosen the four captive screws (combihexagon) on the heat sink in the
following pattern: (4)->(3)->(2)->(1).
Ê
Carefully turn the heat sink back and forth to detach it from the processor.
I
This may be necessary due to the adhesive quality of the thermal
paste located between the heat sink and processor.
V
CAUTION!
Pay special attention not to damage any system board components
surrounding the processor socket.
Ê
Lift the heat sink out of the chassis.
Ê
Thoroughly clean residual thermal paste from the surface of the heat sink
and the processor using a lint-free cloth.
Summary of Contents for PRIMERGY BX924 S3
