154
Upgrade and Maintenance Manual
BX924
S3
Mezzanine cards
Ê
After replacing a network controller in a server blade running Linux OS,
update its MAC address in the related NIC definition file as described in
section
"Updating the NIC configuration file in a Linux environment" on
page 97
.
Ê
Update the firmware as described in section
"Updating mezzanine card
firmware" on page 87
.
Ê
In order to configure a mezzanine card that has been installed or replaced,
the card’s Option ROM has to be enabled in the system board BIOS. For
SAN / iSCSI boot the card's Option ROM has to be enabled permanently. If
applicable, proceed as described in section
"Enabling Option ROM scan" on
page 88
.
Ê
Enable boot watchdog functionality as described in section
"Enabling boot
watchdog functionality" on page 92
.
Ê
If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
"Enabling
BitLocker functionality" on page 99
.
Ê
If applicable, restore LAN teaming configurations as described in section
"After replacing / upgrading LAN/CNA controllers" on page 102
.
Summary of Contents for PRIMERGY BX924 S3
