![background image](http://html.mh-extra.com/html/fujitsu/primergy-bx924-s3/primergy-bx924-s3_upgrade-and-maintenance-manual_121030255.webp)
BX924 S3
Upgrade and Maintenance Manual
255
System board components
Figure 114: Mounting the TPM
Ê
Connect the new TPM to the system board.
Ê
Secure the TPM with the TPM screw (see arrow) using the TPM bit insert
(see
figure 113 on page 254
).
I
Do not fasten the screw too firmly. Stop as soon as the head of the
screw lightly touches the TPM.
10.3.1.4 Concluding steps
Perform the following procedures to complete the task:
Ê
Close the server blade as described in section
"Closing the server blade" on
page 61
.
Ê
Reinstall and secure the server blade in the system unit as described in
section
"Installing the server blade in the system unit" on page 62
.
Ê
If applicable, close the rack door as described in section
"Closing the rack
door" on page 67
.
Ê
Enable TPM in the system board BIOS. Proceed as follows:
Ê
Open a virtual console for your server blade as described in section
"Launching a video redirection to a server blade" on page 69
.
Summary of Contents for PRIMERGY BX924 S3
