BX924 S3
Upgrade and Maintenance Manual
153
Mezzanine cards
Ê
Shut down the defective server blade as described in section
"Shutting down
the server blade" on page 54
.
Ê
Locate the defective mezzanine card using the onboard Local Diagnostic
LEDs as described in section
"Onboard indicators and controls" on
page 284
.
7.4.3
Removing a mezzanine card
Ê
Remove the defective mezzanine card as described in section
"Removing a
mezzanine card" on page 149
.
7.4.4
Installing a mezzanine card
Ê
Install the new mezzanine card as described in section
"Installing a
mezzanine card" on page 143
.
7.4.5
Concluding steps
I
If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller
(expansion card or onboard CNA). For further information, please refer
to section
"Note on network settings recovery" on page 152
.
Perform the following procedures to complete the task:
Ê
Close the server blade as described in section
"Closing the server blade" on
page 61
.
Ê
Reinstall and secure the server blade in the system unit as described in
section
"Installing the server blade in the system unit" on page 62
.
Ê
If applicable, close the rack door as described in section
"Closing the rack
door" on page 67
.
Ê
Enable the PCI slot of the replaced mezzanine card as described in section
"Enabling replaced components in the system BIOS" on page 93
.
Ê
Inform the customer about changed WWN and MAC addresses. For further
information, refer to section
"Looking up changed MAC / WWN addresses"
on page 100
.
Summary of Contents for PRIMERGY BX924 S3
