BX924 S3
Upgrade and Maintenance Manual
183
Processors
9.2.2
Preliminary steps
Before installing a processor, perform the following steps:
Ê
Disable BitLocker functionality as described in section
"Disabling BitLocker
functionality" on page 73
.
Ê
Disable boot watchdog functionality as described in section
"Disabling boot
watchdog functionality" on page 74
.
Ê
If applicable, open the rack door as described in section
"Opening the rack
door" on page 53
.
Ê
Locate the desired server blade as described in section
"Locating the
defective server blade" on page 45
.
Ê
Shut down the server blade as described in section
"Shutting down the
server blade" on page 54
.
Ê
Remove the server blade from the system unit as described in section
"Removing the server blade from the system unit" on page 59
.
Ê
Open the server blade as described in section
"Opening the server blade"
on page 60
.
Ê
If CPU 2 has to be installed, remove the "dummy heat sink" (plastic SSD
holder) as described in section
"Removing the "dummy heat sink" of CPU 2"
on page 228
.
Summary of Contents for PRIMERGY BX924 S3
