Fujitsu PRIMEQUEST 1000 Series Installation Manual Download Page 82

Page: 82 / 344

E110EN). If the boot device has not been recognized by the UEFI, use the [Boot Manager] menu to have it

recognize the Boot device.

The following describes how to configure POST and set Mirror mode and POST from the MMB Web-UI.

Operations

1. Click [Partition] - [Partition#x] - [Mode].

>> The [Mode] window appears. For details on the [Mode] window, see [Mode] window in the

PRIMEQUEST 1000 Series Tool Reference

(C122-E110EN).

FIGURE 3.29 [Mode] window (example)

Remarks

The window displays the [PSA] menu only in the PRIMEQUEST 1800E.

The PRIMEQUEST 1800E2 does not display TPM.

2. Set Mirror mode, and configure POST.

3. Click the [Apply] button.

>> A confirmation dialog box appears.

4. Click the [OK] button.

Remarks

To enable the new settings in the [Mode] window, you need to power off and on the partition.

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 3 Work before Operating System Installation

C122-E107-09EN

Summary of Contents for PRIMEQUEST 1000 Series

























































































































































































































































































































































Search results

Summary of Contents for PRIMEQUEST 1000 Series

Reviews:

Related manuals for PRIMEQUEST 1000 Series

Brands by name

Popular brands

Fujitsu PRIMEQUEST 1000 Series, Installation Manual

Search results

Summary of Contents for PRIMEQUEST 1000 Series

Reviews:

Related manuals for PRIMEQUEST 1000 Series

Brands by name

Popular brands