Fujitsu PRIMEQUEST 1000 Series Installation Manual Download Page 192

Page: 192 / 344

- Even under an REMCS agreement, no software errors are reported.

Remarks

- SVIM installs PSA as it installs the operating system. For details on SVIM, see the

ServerView Installation

Manager

- The installer installs some components for REMCS function on the operating system side during PSA

installation. Only Fujitsu certified service engineers make settings for REMCS.

The following table lists settings for PSA operation. The installer automatically adds or updates these settings

during PSA installation.

Note

Do not change the settings that were automatically added or changed during PSA installation. Otherwise, PSA may

not operate normally.

TABLE 6.10 Settings automatically added/changed during PSA installation

Item

Description

1. Service settings

- PRIMEQUEST Server Agent

- PRIMEQUEST PEM Command Service

- PRIMEQUEST PSA Environment Control Service

2. Environment variable

settings

- PATH variable: Adds the value used by PSA to the existing

PATH variable.

- FJSVpsa_INSTALLPATH variable: Adds a new variable.

3. Port settings

It sets PSA to use the TCP:24450 port.

4. SNMP security settings

Security is set for SNMP Service because PSA needs to accept

SNMP packets from the MMB.

The task varies depending on the parameter selected on the [Security] tab

in the [SNMP Service Properties] window during PSA installation.

- With [Accept SNMP packets from any host] selected:

SNMP security is not configured.

- With [Accept SNMP packets from these hosts] selected: If neither

the MMB IP address nor localhost is specified, localhost and

SNMP security are configured.

5. WMI (Windows

Management

Instrumentation) settings

PSA uses WMI to acquire information on PCI Express cards and

SCSI devices. WMI is installed as standard with Windows.

These settings include settings on the size of memory and number of

internal handles used by WMI to collect this information. If the system

has many LUNs for devices such as RAIDs, it may not have sufficient

memory or internal handles. For this reason, the settings are changed to

the following values:

- Upper limit on memory used: 536,870,912 bytes (default of the

operating system)

- Upper limit on internal handles: 65,536

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E)

164

C122-E107-09EN

Summary of Contents for PRIMEQUEST 1000 Series

























































































































































































































































































































































Search results

Summary of Contents for PRIMEQUEST 1000 Series

Reviews:

Related manuals for PRIMEQUEST 1000 Series

Brands by name

Popular brands

Fujitsu PRIMEQUEST 1000 Series, Installation Manual

Search results

Summary of Contents for PRIMEQUEST 1000 Series

Reviews:

Related manuals for PRIMEQUEST 1000 Series

Brands by name

Popular brands