Fujitsu PRIMEQUEST 1000 Series Installation Manual Download Page 10

Page: 10 / 344

Alert messages

This manual uses the following alert messages to prevent users and bystanders from being injured and to prevent

property damage.

This indicates a hazardous (potentially dangerous) situation that is likely to result in death

or serious personal injury if the user does not perform the procedure correctly.

This indicates a hazardous situation that could result in minor or moderate personal injury

if the user does not perform the procedure correctly. This also indicates that damage to the

product or other property may occur if the user does not perform the procedure correctly.

This indicates information that could help the user use the product more efficiently.

Alert messages in the text

An alert statement follows an alert symbol. An alert statement is indented on both ends to distinguish it from regular

text. Similarly, one space line is inserted before and after the alert statement.

Only Fujitsu certified service engineers should perform the following tasks on this product

and the options provided by Fujitsu. Customers must not perform these tasks under any

circumstances. Otherwise, electric shock, injury, or fire may result.

- Newly installing or moving equipment

- Removing the front, rear, and side covers

- Installing and removing built-in options

- Connecting and disconnecting external interface cables

- Maintenance (repair and periodic diagnosis and maintenance)

The

List of important alert items

tables list important alert items.

Product operating environment

This product is a computer intended for use in a computer room environment. For details on the product operating

environment, see the following manual:

PRIMEQUEST 1000 Series Hardware Installation Manual

(C122-H004EN)

Notes

- If you have a comment or request regarding this manual, or if you find any part of this manual unclear, please

take a moment to share it with us by filling in the form at the following webpage, stating your points

specifically, and sending the form to us:

https://www-s.fujitsu.com/global/contact/computing/PRMQST_feedback.html

- The contents of this manual may be revised without prior notice.

- The PDF file of this manual is intended for display using Adobe® Reader® in single page viewing mode at

100% zoom.

- The PRIMEQUEST 1800E2/1800E model supports only 200 V power supply.

Trademarks

- Microsoft, Windows, and Windows Server are trademarks or registered trademarks of Microsoft Corporation

in the United States and/or other countries.

PRIMEQUEST 1000 Series Installation Manual
Preface

viii

C122-E107-09EN

Summary of Contents for PRIMEQUEST 1000 Series

























































































































































































































































































































































Search results

Summary of Contents for PRIMEQUEST 1000 Series

Reviews:

Related manuals for PRIMEQUEST 1000 Series

Brands by name

Popular brands

Fujitsu PRIMEQUEST 1000 Series, Installation Manual

Search results

Summary of Contents for PRIMEQUEST 1000 Series

Reviews:

Related manuals for PRIMEQUEST 1000 Series

Brands by name

Popular brands