TABLE 6.13 [Protocol and Ports] setting items
Window item
Selected or entered value
Protocol type
TCP
Local port
All Ports
Remote port
Select [Specific Ports]. Then, enter 5000 in the
text box below it.
FIGURE 6.19 New Outbound Rule Wizard - Protocol and Ports
19. The wizard displays the [Scope] window, as indicated at the upper left. Select or enter values for the following
items. Then, click the [Next] button.
TABLE 6.14 [Scope] setting items
Window item
Selected or entered value
Which local IP addresses does this rule match?
Any IP address
Which remote IP addresses does this rule match?
Select [These IP addresses]. Then, click the
[Add] button.
PRIMEQUEST 1000 Series Installation Manual
CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E)
180
C122-E107-09EN
