manualshive.com logo in svg

FujiFilm CR-IR341, Service Manual

Share
Download
FujiFilm CR-IR341 Service Manual Download Page 948

CR-IR341 

Service Manual

MU - 157

009-051-05
11.20.99 FM2638

MU - 157

12

13

14

15

16

11

17

C

ONTENTS

■

 List of install utility error messages

If an error occurs during installation, the install utility displays the following error messages.
When an error message appears, grasp its meaning, take proper remedial action, and
resume the installation process.

Could not initialize DMA device.

➮

An abnormality was detected during DMA device initialization.

The MTH08A or CPU90E board is faulty.

Could not initialize floppy device.

➮

An abnormality was detected during floppy device initialization.

The CPU90E board is faulty.

Cannot open </fd0/bootrom.sys>,please setting boot disk.

➮

The disk placed in the disk drive is not the installation system disk or the contents of
the disk are damaged.

Error loading file </fd0/bootrom.sys>

➮

The contents of the file named “bootrom.sys” are illegal.

Cannot open </fd0/VXWORKS.ST>,please setting boot disk.

➮

The disk placed in the disk drive is not the installation system disk or the contents of
the disk are damaged.

Error loading file </fd0/VXWORKS.ST>

➮

The contents of the file named “VXWORKS.ST” are illegal.

Could not initialize SCSI device.

➮

The hard disk drive was not successfully mounted or formatted.

The MTH08A board, CPU90E board, or SCSI hard disk drive is faulty.

Could not access HD device.

➮

The hard disk drive was not successfully accessed.

The MTH08A or SCSI hard disk drive is faulty.

error make directory:status= <********>

➮

The directory was not successfully made (the “********” portion is a detail code).

The SCSI hard disk drive is faulty.

Cannot open <********>

➮

The file could not be opened (the “********” portion is a filename).

The floppy disk or SCSI hard disk drive is faulty.

error copy file:status= <********>

➮

The file could not be coped (the “********” portion is a detail code).

The floppy disk or SCSI hard disk drive is faulty.

error rename directory: status= <********>

➮

The directory name could not be changed (the “********” portion is a detail code).

The SCSI hard disk drive is faulty.

009-051-05
11.20.99 FM2638 (1)

Summary of Contents for CR-IR341

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands