FujiFilm CR-IR341, Service Manual

Page: 1468 / 1472

CR-IR341P/342P/343P/344P/345P/347P/348RU Service Manual 53
009-064-01
08.30.2001 FM3145
53
00000064.EPS
■
Setup on the IR Side
l Changing the EQUIPMENT file setup
(1) Start the M-Utility to display the “2. CONFIGURATION SETTING” - “4. EQUIPMENT”
configuration, and add a host with IDT capability, as needed (e.g., CL-b).
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
# EQUIP
#
# Function Hn=Îname [Host Name]...
#
# Function = DISPLAY or IDT
# Host Name= HostName (Network:Hostname def. by hosts)
IDT CL-a CL-b
DISPLAY CL-a
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
REFERENCES
• Up to five IDT units may be specified in the “IDT CL-a...” setup item.
• When “IDT CL-a CL-b CL-c” is set, an inquiry about ID information is made to the
host that is described first (in this case, CL-a). Only if communication with that host
fails due to power-OFF and so forth, an inquiry about ID information is made to the
host that is described next.
●
Example of CL (CL-a and CL-b) setup
◆
NOTE
◆
Be sure to set both CL-a and CL-b devices.