FujiFilm CR-IR341, Service Manual

Page: 295 / 1472

CR-IR341
Service Manual
MT - 33.1
009-051-06
04.20.2001 FM3006
MT - 33.1
2 3 4 5 6 1 C
ONTENTS
2400
File open error
An attempt is made to open a file, but it cannot be opened.
• The file is absent in the HDD.
• The file in the HDD is corrupted.
• The HDD itself is faulty, etc.
E-1
2403
File read error A file cannot be read. HDD, MTH08A board
E-1
2480
EDR data transmission designation error
When the EDR backup data is transferred during read,
the target host name for the EDR data is not set. Or the
host name format is improper.
Check the setup value in the configuration file.
E-4
2481
Connection establishment error
When the EDR backup data is transferred during read,
a connection with the target for the EDR data cannot be
established.
Check the network-connected units.
E-7
2482
EDR data transmission error
When the EDR backup data is transferred during read, the
connection is disconnected during EDR data transfer.
Check the network-connected units.
E-7
2490
Menu replacement error
The ID information is acquired after the start of read, and,
because its menu code is not yet registered in the machine,
it is replaced with a default menu code.
Check if the menu code has been registered.
E-8
TR1H1320.EPS
2423
DSP4 image processing error 2
Because an error occurs in image processing during reading,
reading is retried.
Faulty IMG07B, MTH board, etc.
E-2
Code Name Significance/Occurrence Condition Detail Probable Cause/Remedy Refer to
Detail: Denotes the detail information format.