FujiFilm CR-IR341, Service Manual

Page: 217 / 1472

CR-IR341 Service Manual 009-051-04
05.31.99 FM2460
MD - 154
MD - 154
2 3 4 5 6 7 9 10 1 8 C
ONTENTS
START
Y
N
Y
N
END
DELAY TA13
Is SA2 opened?
Is SA1 opened?
FR1H0441.EPS
Elevation permission
is issued
Error message output
"STOP ALARM
/ UNLOAD CASS."
Alarm disabled
Cassette removed
Cassette removal
Cassette hold
release 2
Fig.6.2.2
LEDT2 is turned on
LEDT2 is turned off
LEDT1 is turned on
Preprocessing: Fig. 2.4.3, Fig. 2.4.4, Fig. 2.10.3,
Fig. 2.10.4, Fig. 4.2.2, and Fig. 4.2.3
Fig. 6.2.1 Error Handling: Cassette Ejection 2
No matter whether there is
any IP in the machine or
there is any unprocessed
cassette, it is placed in a
queue until an elevation
permission.
●
Another IP in the machine
proceeds to the load
standby condition.
●
The unprocessed cassette
enters the feed standby
condition.
This elevation permission
allows the process to start.
●
If there is another IP in
the machine,up-down load
→
load.
●
If there is any unprocessed
cassette, up-down feed
→
feed.
The cassette removable
condition is indicated.
Operation performed
by the operator
Instant return of cassette
is supported.
The ready condition is
indicated.
Return to normal routine
Cassette ejection 2
If hold release
failure occurs
during cassette
ejection 2, the
system goes
down.
Removal of the cassette
for the error IP is notified
to the user, and after the
cassette removal, an
elevation permission is
issued to start the
processing for the next
IP in the queue.
Table 6.2.1 Operation Parameters
Wait for cassette OUT 0.5 sec
TA13
Symbol Description
Value
TR1H0094.EPS
Table 6.2.1a List of I/O Names Used in the Flow and Drawing
SA1
SA2
LEDT1
LEDT2
SA1
SA2
LEDT1
LEDT2
SA5
SA6
LEDT3
LEDT4
SA9
SA10
LEDT5
LEDT6
SA13
SA14
LEDT7
LEDT8
I/O name
in flow
I/O name
Topmost
shelf
position
2nd shelf
position
3rd shelf
position
4th shelf
position
TR1H0095.EPS
6.2 Error Handling: Cassette Ejection 2
(1) Overall/General Sequence
In this sequence, an error IP is returned to the
cassette.
The next IP processing is initiated after removal of
the error IP.
●
Corresponding sequences
Fig. 2.4.3
Feed Suction Conveyance
Fig. 2.4.4 Feed Conveyance
Fig. 2.10.3 Load Suction
Fig. 2.10.4 Load Suction Conveyance
Fig. 4.2.2 Feed Step Operation (2/3 and 3/3)
Fig. 4.2.3 Load Step Operation (1/3 and 2/3)