FujiFilm CR-IR341, Service Manual

Page: 305 / 1472

CR-IR341 Service Manual MT - 42
009-051-04
05.31.99 FM2460
MT - 42
2 3 4 5 6 1 C
ONTENTS
2991
File open error An attempt to open the log file fails.
• The file in the HD is corrupted.
• HD failure
A-1
2992
File write error
An attempt to write the log file fails.
• The file in the HD is corrupted.
• HD failure
A-1
2993
File close error
An attempt to close the log file fails.
An error status is returned by the SMCU driver.
HD failure
A-1
2994
SMCU driver hard error
A-1
2A00
File open error
An attempt is made to open a file, but it cannot be opened.
• The file is absent in the HDD.
• The file in the HDD is corrupted.
• The HDD itself is faulty, etc.
K-1
2A01
File format error
The file format is improper.
• The file format in the HDD is improper.
• The file in the HDD is corrupted.
• The HDD itself is faulty, etc.
K-1
2A02
File setup value error The data of the file is improper.
• The data described in the file in the HDD has an
out-of-range value.
• The file in the HDD is corrupted.
• The HDD itself is faulty, etc.
K-1
2A10
Magnetic card reader inoperative
*: A06 or later
The magnetic card reader is inoperative with the machine
configuration that uses the magnetic card reader.
SNS08A board, magnetic card reader
K-2
TR1H1256.EPS
Code Name Significance/Occurrence Condition Detail Probable Cause/Remedy Refer to
Detail: Denotes the detail information format.
2994*
SMCU error
E
SMCU failure. Replace the DMC08A board.