FujiFilm CR-IR341, Service Manual

Page: 1270 / 1472

CR-IR341 Service Manual IN - 73
009-051-07
08.30.2001 FM3115
IN - 73
2 3 4 5 6 7 1 8 A1 A2
C
ONTENTS
(5) Nail the top protective cover removed at step (2) onto the carrier pallet on the rear side
of the machine to form a slope for placing the machine down onto the floor.
◆
NOTES
◆
• The slope should be formed on the rear side of the machine. If the slope is formed on
the front side of the machine, the adjustable feet will interfere with the floor when the
machine is put down from the carrier pallet, so that it cannot be put down smoothly.
• Both upper-end corners of the top protective cover should be nailed securely onto
the carrier pallet. If you try to lower the machine without nailing the top protective
cover down, the top protective cover may move out of position, causing the machine
to topple down.
• The top protective cover should be used as a slope only once when the machine is
unloaded. If the top protective cover is used many times, it may lose strength, so that
it may be broken when the machine is placed on it.
FR1B1093.EPS
Top protective cover
Rear of
machine
Carrier pallet
Nail
Nail
Machine
Top protective
cover
Sheet
FR1B1013.EPS
Push
When the machine is unloaded, its adjustable feet
may come into contact with the floor,
thereby damaging the floor surface. If it is necessary
to protect the floor surface, fold up the moisture-proof sheet
that covered the machine, and place it between
the slope plate and floor before unloading the machine.
(6) Raise the adjustable feet of the machine all the way up.
(7) Move the machine over the slope surface with the aid of the machine casters until it is
lowered from the carrier pallet.
CAUTION
When moving the machine over the slope surface with the aid of the casters, be sure
to have an assistant support the upper portion of the machine for the purpose of
preventing the machine from toppling down. Also, move the machine slowly over the
slope surface to avoid shocking the machine.