FujiFilm CR-IR341, Service Manual

Page: 1352 / 1472

CR-IR341
Service Manual
IN - 149
009-051-07
08.30.2001 FM3115
IN - 149
2 3 4 5 6 7 1 8 A1 A2
C
ONTENTS
(2) Touch the location to be edited.
➮
The cursor appears at the location touched.
The cursor can be moved by touching the
→
,
→
,
→
, or
→
key.
(3) Using a virtual keyboard, edit it.
• Display a desired virtual keyboard for entry.
Three types of virtual keyboards are available; by touching the
▲
or
▼
key, one of the
three virtual keyboards can be selected. Also, by touching the Caps key, the caps
mode can be toggled to the lower-cap display corresponding to the three types of
virtual keyboards.
• Using the [DEL] or [BS] key, modify the value.
[DEL] key: Whenever it is touched once, a character immediately after (to the right
of) the cursor is deleted.
[BS] key: Whenever it is touched once, a character immediately before (to the left
of) of the cursor is deleted.
SUPPLEMENTARY NOTE
If you edited the file incorrectly and it is difficult to undo the editing with the [DEL] or [BS] key,
press the [CANCEL] key and repeat from step (1) all over again.
(4) Press the [SAVE] key.
➮
The edited contents are saved to the HD.
(5) Back up the configuration file that has been set up.
“7.3 Backing Up Configuration File”
(6) Press the RESET button.
➮
The machine is reset so that the file that has been set up is effective.
SUPPLEMENTARY NOTE
If there is any other configuration item to be set up, do not press the RESET button. The
RESET button should be pressed after all the setups are finished.
0
.
SP
D E F
A B C
7 8 9
4 5 6
1 2 3
DEL
SAVE
/sb0/SYSTEM/ETC/IRSET.CFG
CANCEL
BS ENT
Caps
FR1B1203.EPS
The cursor appears
at the location touched.
Virtual keyboard
#
# IRSET.ORG/CFG
#
IDT=1
#1.System Type
# 0:CSL / 1:IDT
FNT=0
#2.FONT(LANGUAGE)
# 0:JPN / 1:ENG / 2:GER / 3:FRN / 4:ESP /
# 5:ITA / 6:SWE / 7:FIN / 8:DEN / 9:NOR /
# 10:KOR
# 7:Not Available
# 10:114Y5431030(Korean Option) is necessary.
IPS="172.16.0.1 "
#3.IP Address(CPU90E) (Length=15)