FujiFilm CR-IR341, Service Manual

Page: 1252 / 1472

CR-IR341
Service Manual
IN - 59
009-051-07
08.30.2001 FM3115
IN - 59
2 3 4 5 6 7 1 8 A1 A2 C
ONTENTS
●
DICOM (Base on DICOM)
Perform “Base on DICOM” setup for both the local machine and transfer destination QA-WS.
The format to be used is indicated below.
HostName,ServiceName:AEName,[PortNo.],[SOPType],[CompType],[Timeout1],[Timeout2],
[DensityType]
• HostName
Enter the host name that is defined by HOSTS or DEVICE.
• ServiceName
Set “STORAGE_U” for the local machine and “STORAGE_P” for the QA-WS.
• AEName
Set the DICOM standard Application Entity name (consisting of up to 16 ASCII
characters).
• PortNo.
Set the TCP port number that the Base-on-DICOM application uses. This entry is
meaningless for the transmitting end. The default setting is “104”.
• SOPType (SOP Class Type definition)
Although two options are selectable (1: FINP; 2: OEM), choose “1”.
• CompType (image data compression definition)
Although two options are selectable (0: no compression; 1: JPEG compression),
choose “1”.
• Timeout1
Set the timeout time (in seconds) for the TCP socket connect/recv command.
• Timeout2
Set the timeout time (in seconds) for one-image transfer.
• DensityType
Set the output density for each output destination unit. “1” should always be set.
The following example (bolded entry portion) shows how to enter the above settings.
| # |
| # DICOM |
| # |
| # HostName,ServiceName:AEName, [PortNo.],[SOPTType], |
| # [CompType],[Timeout1],[Timeout2], |
| # [DensityType] |
| # |
| # ServiceName = STORAGE_U | STORAGE_P | QR_U |
| # | QR_P | PRINT_U | PRINT_P |
| # |
| fcr5000n-1,STORAGE_U :5000_DICOM,,1,1,100,600,1 |
| qa-ws1,STORAGE_P :hic655qa-scp,5045,1,1,100,600,1 |