FujiFilm CR-IR341, Service Manual

Page: 799 / 1472

CR-IR341 Service Manual MU - 16 009-051-07
08.30.2001 FM3115
MU - 16
2 3 4 5 6 7 9 10 1 8 C
ONTENTS
FR1H1385.EPS
4.ELECTRICAL UTILITY
: Conducts electrical-related diagnostic checks on the erasure lamp,
image memory, image processing board, etc.
0.QUIT
1.ERASURE LAMP TEST : Conducts an erasure lamp illumination test.
2.IMAGE MEMORY TEST : Conducts an image memory capacity diagnostic check
and marching test.
3.DSP TEST : Performs self-diagnostic checks of all the image processing boards mounted
in the machine.
4.LAN : Conducts network-related diagnostic checks.
0.QUIT
1.ETHERNET MAC ADDRESS : Displays the Ethernet MAC addresses of the CPU90E
and CPU90F.
2.PING : Executes "ping" by designating the LANC used (CPU90E or CPU90F) and the host
name of its connection designation (or IP address).
3.CPU90F DMA : This menu should not be used.
5.HDD: Conducts hard disk drive diagnostic checks.
0.QUIT
1.WRITE-READ VERIFY : Writes 1 Kbytes of monotonously increasing data onto the hard
disk, and reads it back to verify that the written data and read
data agree with each other.
6.FDD: Conducts floppy disk drive diagnostic checks.
0.QUIT
1.WRITE-READ VERIFY : Writes 1 Kbytes of monotonously increasing data onto a floppy
disk, and reads it back to verify that the written data and read
data agree with each other.
[9.]
NOTE: Numerals in brackets denote a relevant chapter in this manual.
[9.1]
[9.2]
[9.3]
[9.4]
[9.5]
[9.6]