FujiFilm CR-IR341, Service Manual

Page: 1350 / 1472

CR-IR341
Service Manual
IN - 147
009-051-07
08.30.2001 FM3115
IN - 147
2 3 4 5 6 7 1 8 A1 A2
C
ONTENTS
7.2 Editing Configuration Files
To set up a configuration file on the FCR5000R, use “2. CONFIGURATION SETTING” of M-
Utility.
Referring to the worksheet, edit the configuration file in the order of menu hierarchy.
■
Menu Hierarchy and Configuration Files
FR1B1199.EPS
2.CONFIGURATION SETTING : View or change the setting in the configuration file.
1.SYSTEM (IRSET.CFG) : Define overall setup information regarding the machine
3.REMOTE SWITCH (RMT_SW.CFG) : Remote switch ON/OFF setting for the intelligent hub
2.PRINT (FILMFMT.CFG) : Define setup information related to the film output format
4.EQUIPMENT (EQUIP) : Define setup information related to units connected
5.LOCAL INTERFACE (INTERFACE) : Define setup information for communication requirements over serial line connection
6.NETWORK HOST INTERFACE (DEVICE) : Define setup information for network-connected communication
7.HOSTS ADDRESS (HOSTS) : Set up the address for network connection
8.DISTRIBUTION (CODEDSTB) : Set up the distribution destination for network connection
10.NETMASKS (NETMASKS) : Set up the subnet mask for network connection
11.DICOM (DICOM) : Base on DICOM.
9.ROUTING (ROUTE) : Set up the routing for network connection
NOTE 1: Titles in parentheses denote file names to be edited.
NOTE 2: Numerals in brackets denote relevant chapter in this manual.
[3.1]
[3.2]
[3.3]
[3.4]
[3.5]
[3.6]
[3.7]
[3.8]
[3.9]
[3.10]
0. QUIT
1. ERROR LOG UTILITY
2. CONFIGURATION SETTING
3. TEST MODE
4. ELECTRICAL UTILITY
5. SCANNER UTILITY
6. MECHANICAL UTILITY
7. FILE UTILITY
8. BACKUP MEMORY
9. HV OFF
10. MENU SETTING
> 2
0.QUIT
1.SYSTEM
2.PRINT
3.REMOTE SWITCH
4.EQUIPMENT
5.LOCAL INTERFACE
6.NETWORK HOST INTERFACE
7.HOSTS ADDRESS
8.DISTRIBUTION
9.ROUTING
10.NETMASKS
11.DICOM
FR1B1202.EPS
0 . SP
D E F
A B C
7 8 9
4 5 6
1 2 3
DEL BS ENT
Caps