FujiFilm CR-IR341, Service Manual

Page: 543 / 1472

CR-IR341 Service Manual MC - 52 009-051-04
05.31.99 FM2460
2 3 4 5 6 7 9 10 1 8
C
ONTENTS
MC - 52
■
Adjusting Rearward Toppling Prevention Bracket
(1) Loosen the two screws that retain the metric rearward toppling prevention bracket
(screwed down on its upper and lower portions).
(2) Make adjustment as appropriate so that the descent of the trailing edge of the movable
roll is 1 mm or less when it is slightly pushed down.
By sliding the rearward toppling prevention bracket in the direction of arrow as shown
below (toward the shutter assembly), the descent of the trailing edge of the movable
roll is decreased.
FR1H1763.EPS
The descent is decreased.
Metric movable roll
Trailing edge of movable roll
Top view
(1)
Hex socket head bolt with spring and
plain washer
M4x10 (lower portion)
(1)
Hex socket head bolt with spring
and plain washer
M4x10 (upper portion)
(2)
Metric rearward toppling prevention
bracket
Movable roll
Movable roll
Movable roll support guide
Ensure that it is 1 mm or less.
Slightly push the trailing edge of the movable roll.
Side view
FR1H1766.EPS