FujiFilm CR-IR341, Service Manual

Page: 1160 / 1472

CR-IR341
Service Manual
PM - 71
009-051-04
05.31.99 FM2460
PM - 71
2 3 4 1 C
ONTENTS
(12) Make sure that the socket of the PMT08A board is fitted into the socket of the light-
collecting guide and that the sockets of the PMT08A board and light-collecting guide
are parallel to each other.
If anything abnormal is found, remove the single screw that retains the light-collecting
guide retaining bracket. While holding the light-collecting guide, push in the PMT08A
board assembly, and adjust the position of the sockets of the PMT08A board and light-
collecting guide as appropriate.
After the brace is fixed with the screw, verify again that the sockets are parallel, and
then proceed to the next step.
CAUTIONS
• Wear gloves when handling the light-collecting guide assembly. If it is handled with
bare hands, the light-collecting guide assembly may be soiled or damaged.
• Wear a mask to prevent saliva from sputtering around on the light-collecting guide.
(13) Connect the connectors (CN1, 2 to the PMT08A board).
OK NG
FR1H1798.EPS
Light-collecting guide assembly
Parallel Not parallel
PMT08A board
Socket
FRONT
Light-collecting
assembly
CN1
Scanner unit
FR1H1481.EPS
PMT08A
board
CN2
(13)
(13)
(13)