FujiFilm CR-IR341, Service Manual

Page: 3 / 1472

Getting Started
CR-IR341
Service Manual
0.2 009-051-07
08.30.2001 FM3115
0.2
Getting Started
■
Scope
This Service Manual is applicable to Fuji Computed Radiography CR-IR341 and CR-IR341P.
The machine is categorized as Class 1 according to IEC classification.
For the console (hereinafter abbreviated as CSL), reference should be made to the Service
Manual for ID-T741 or CR-IR348CL.
◆
NOTES
◆
• Differences between the CR-IR341 and CR-IR341P are as follows.
The CR-IR341 may be connected to the ID-T741.
The CR-IR341P may be connected to the CR-IR348CL and ID-T741.
• Units with serial number #5001 or later are called “CR-IR341P”.
■
Notational Conventions
In this manual, some conventions for unit symbols, cautions, warnings, etc. are followed to
provide a simple, easy-to-read layout.
●
Notation of unit symbols
For notation of unit symbols, metric units set forth in the International Systems of Units (SI)
are used, as a rule. However, some metric units that are not allowed in the SI but are permit-
ted in the Measurement Law are used partially.
●
Notation of cautions, warnings, etc.
The notation formats of “warning,” “caution,” “note,” “supplementary note,” and “reference” are
shown below.
WARNING
Used when physical injury or death may occur if the instruction is not observed.
CAUTION
Used when a minor physical injury may be incurred or the machine may suffer serious damage
if the instruction is not observed.
◆
NOTE
◆
Used when the machine may suffer damage, or any failure or malfunction may occur if the
instruction is not observed.
SUPPLEMENTARY NOTE
Used to supply information that is not related directly to the work flow but may be useful if known.
Used to indicate the section you should refer to.