manualshive.com logo in svg

FujiFilm CR-IR341, Service Manual

Share
Download
FujiFilm CR-IR341 Service Manual Download Page 35

CR-IR341 

Service Manual

0.30

009-051-04
05.31.99 FM2460

 0.30

How Service Manual Is Organized

How Service Manual Is Organized

This Service Manual is available in two forms: electronic manual and paper manual. The
contents described are the same, but how to access the information is different. See either
“

■

 Electronic Manual” or “

■

 Paper Manual” for their respective interface, depending on the

media you refer to.

■

 Electronic Manual (currently not available)

An electronic version of the manual is supplied in the form of PDF data.  Before consulting
the electronic manual, familiarize yourself with the following matters.

●

 About PDF

An electronic version of the manual is distributed as a PDF (Portable Document Format) file.
PDF is an electronic document file format developed by Adobe Systems Inc., and can be
read with a commercially available PDF viewer.

●

 About Acrobat Reader

The CD-ROM that contains electronic manuals also contains Adobe Systems’ Acrobat
Reader as a their PDF viewer.

To view an electronic manual, use Acrobat Reader bundled. If any PDF viewer other than
Acrobat Reader is used, the image displayed on screen or printed out may differ from the
original.

The recommended operating environments for running Acrobat Reader alone are as follows.

• Version:

Acrobat Reader 3.0 or later

• CPU:

Pentium 133 MHz or faster processor

• OS:

Microsoft Windows 95 or Windows NT 4.0

• Free memory:

at least 16MB of RAM after startup of Windows NT

(at least 32 MB of RAM recommended)

• Display:

at least 800x600 dots, with color depth of at least 256 colors

• CD-ROM drive: at least 4x speed (8x or higher speed recommended)

• Disk capacity:

at least 5MB of free space after startup of Windows NT

●

 Installing Acrobat Reader

For installation of Acrobat Reader, see the “Read Me” file in the CD-ROM that contains
electronic manuals. If the version of Acrobat Reader is older than 3.0, the electronic manual
cannot be viewed or, if it can be viewed, its specific features may not be guaranteed. Refer-
ring to the “Read Me” file, install a proper version of Acrobat Reader.

Summary of Contents for CR-IR341

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands