FujiFilm CR-IR341, Service Manual

Page: 1241 / 1472

CR-IR341
Service Manual
IN - 48 009-051-07
08.30.2001 FM3115
2 3 4 5 6 7 1 8 A1 A2
C
ONTENTS
IN - 48
3.7 HOSTS ADDRESS (HOSTS)
It sets a correspondence between a host name and its IP address. One host should be
defined per line. Up to 127 hosts can be defined.
■
Format
IP Addr Host Name
“ ” denotes a space.
●
IP Addr (IP address)
An IP address is set in the form of “xxx.xxx.xxx.xxx”, using numerals ranging from 0 to 255.
“xxx” denotes 0 through 255.
◆
NOTES
◆
• To one CR-IR341 machine, be sure to assign both a standard LAN IP address (CPU90E)
and a LAN board IP address (CPU90F).
Example) 172.16.0.1 fcr5000a
... CR-IR341#1 (CPU90E)
172.16.0.2 fcr5000a-1 ... CR-IR341#1 (CPU90F)
• Be sure to match the standard LAN IP address (CPU90E) and LAN board IP address
(CPU90F) to the IP addresses set in item No. 3 “IPS” and item No. 4 “IPI” of SYSTEM:
IRSET.CFG, respectively.
●
Host Name (host name)
A host name is set within 10 characters, using lowercase alphabets (a through z), numerals
(1 through 9), and hyphen (-).
◆
NOTES
◆
• If any alphabet is used in a host name, be sure to use lowercase letters.
• The initial letter of a host name should always be a lowercase alphabet.