FujiFilm CR-IR341, Service Manual

Page: 224 / 1472

CR-IR341
Service Manual 009-051-04
05.31.99 FM2460
MD - 161
MD - 161
2 3 4 5 6 7 9 10 1 8 C
ONTENTS
6.8 Error Handling: ID Information Error
(1) Overall/General Sequence
This error handling is performed when “ID information not registered” error occurs in the
CSL/IDT information check sequence.
●
Corresponding sequence
Fig. 2.6.6 CSL/IDT Information Check
START
END
Y
N
Y
N
Is SA1 opened?
Is SA2 opened?
FR1H0449.EPS
Error message output
Stop ARARM
/UNLOAD CASS.
Error message output
Stop ARARM
/UNLOAD CASS.
Alarm disabled
Alarm disabled
Elevation permission
is issued
Cassette removed
Cassette removal
DELAY TA13
Cassette hold release
Reverse conveyance
load
Fig.2.2.2
Fig.6.3.2
Suction cup movement (HP
→
load standby)
DRIVE (MB1/PB14)
LEDT2 is turned on
LEDT2 is turned off
LEDT1 is turned on
Cassette removed
Executed without
registration
Preprocessing: Fig. 2.6.6
No matter whether there is any IP in the
machine or there is any unprocessed
cassette, it is placed in a queue until
an elevation permission.
●
Another IP in the machine proceeds
to the load standby condition.
●
The unprocessed cassette enters the
feed standby condition.
This elevation permission allows the
process to start.
●
If there is another IP in the machine,
up-down load
→
load.
●
If there is any unprocessed cassette,
up-down feed
→
feed.
Operation performed by the operator
Instant return of cassette is supported.
The ready condition is indicated.
The cassette removable condition is
indicated.
At the time when the error
IP is returned to the
cassette, an elevation
permission is issued to
start the processing for the
next IP in the queue.
At the same time, removal
of the cassette for the error
IP is notified to the user.
Cassette ejection
Same as in the routine
described in Fig. 2.11.1.
If hold release error
occurs during cassette
ejection, degeneration
takes place for the
relevant shelf.
Suction cup load
preparation
The IP without ID information registration
is ejected.
Return to normal routine
If continued without registration, the IDT
waits for IP registration after reading.
Fig. 6.8.1 Error Handling: ID Information Error