Fuji Xerox ApeosPort-V C2276, Administrator'S Manual

Page: 571 / 783

Error Code
571
Pro
b
lem
So
lv
in
g
15
027-763 [Cause] The machine failed to verify the user information against the remote accounting server.
[Remedy] Take one of the following measures:

Check whether the remote accounting server is operating properly.

Check whether there is no network failure.

Connect the network cable securely.
 Confirm the settings on the machine.
027-764 [Cause] An error occurred in the communication with the AirPrint Scan client, or the client
canceled the job.
[Remedy] Check the network communication with the AirPrint Scan client by checking the
following.

Check that the amount of space of the AirPrint Scan client is enough.

Check the connection of the network cable.
027-770
[Cause] The print job has a problem.
[Remedy] Submit the print job again.
027-771 [Cause] The hard disk of the server connected to the machine is full.
[Remedy] Delete unnecessary data from the server.
027-772 [Cause] An error occurred during communication with the SMTP server.
[Remedy] Use ASCII characters to modify the host name that has been specified under [Tools] >
[Connectivity & Network Setup] > [Machine's E-mail Address/Host Name]. If the error
still is not resolved, confirm with your network administrator whether the SMTP server
supports the HELO command.
027-773
[Cause] An error occurred during communication with the SMTP server.
[Remedy] Wait for a while, and then execute the operation again.
027-774 [Cause] The specified e-mail address contains unsupported characters.
[Remedy] Specify the e-mail address using only ASCII characters.
027-775 [Cause] Too many destination addresses have been specified.
[Remedy] Reduce the number of destination addresses. If the error still is not resolved, confirm
with your network administrator whether the SMTP server supports the EHLO command.
027-776
[Cause] An error occurred during communication with the SMTP server.
[Remedy] Use ASCII characters to modify the host name that has been specified under [Tools] >
[Connectivity & Network Setup] > [Machine's E-mail Address/Host Name]. If the error
still is not resolved, confirm with your network administrator whether the SMTP server
supports the EHLO command.
027-777 [Cause] The destination SMTP server does not support SMTP-AUTH.
[Remedy] Set [E-mail Send Authentication] to [Off] under [Tools] > [Connectivity & Network
Setup] > [Outgoing/Incoming E-mail Settings] > [SMTP Server Settings].
027-778
[Cause] The destination SMTP server does not support the SMTP-AUTH system set on the
machine.
[Remedy] Confirm the authentication type supported by the SMTP server with your network
administrator. The machine supports the following authentication types: AUTH GSSAPI
(only for Kerberos), AUTH NTLMv2, AUTH NTLMv1, AUTH PLAIN, AUTH LOGIN, AUTH
CRAM-MD5.
027-779 [Cause] Failed to authenticate the SMTP server.
[Remedy] Confirm the login name and password set to SMTP-AUTH.
Error Code Cause and Remedy