FS M6500 Series, Configuration Manual

Page: 181 / 185

M6500 Series NE Configuration Manual
180
Figure9-91 Successfully Export Data of SDH Regeneration Segment
9.3.6. History Performance Statistics of Ethernet
9.3.6.1. Ethernet History Monitoring Parameters Introduction
The monitoring parameter of the history monitoring point for Ethernet includes time interval, which is a
shortcut to choose the time. There are three options--one day, three days and a week for you to choose.
Duration: You can choose a specific day or a period of time according to your needs.
Performance Monitoring Point: entrance-near end, exit-near end.
Performance Monitoring Parameters: The monitoring parameters of Ethernet monitoring point include normal
frame number, unicast frame number, multicast frame number, broadcast frame number, CRC error frame,
alignment error frame number, ultra long frame number (Frame Too Long), ultra long Jabber frame number
(CRC error), ultra short frame number (CRC error), discarded frame number, ultra short frame number (CRC
normal), 64-byte frame number, 65-127-byte frame number, 128-255-byte frame number, 256-511-byte frame
number, 512-1023-byte frame number, 1024-1518-byte frame number.
Figure9-92 Ethernet History Performance Parameters
9.3.6.2. View Ethernet History Monitoring Information
15minutes and 24hours of Ethernet history data operation and display are the same form. Here we take
15-minute Ethernet history monitoring point as an example. Choose the appropriate network elements, slots,
ports and monitoring cycles through the screening box above the menu, and then select the time interval,
performance monitoring point and parameters which need to be monitored in the right menu.Parameters to be
monitored can be all selected or only select one or two of them to check.After that, click Apply button on the
lower right corner. From the graph, we can see the trend of the refraction chart of the monitoring parameters.