M6500 Series NE Configuration Manual
170
dispersion (CD), average chromatic dispersion (CD), maximum optical signal-to-noise ratio (OSNR), minimum
optical signal-to-noise ratio (OSNR), average optical signal-to-noise ratio (OSNR).
Figure9-68 OCh History Performance Parameters
9.3.2.2. View OCh History Monitoring Information
15minutes and 24hours of OCh history data operation and display are the same form. Here we take 15-minute
OCh history monitoring point as an example. Choose the appropriate network elements, slots, ports and
monitoring cycles through the screening box above the menu, and then select the time interval, performance
monitoring point and parameters which need to be monitored in the right menu.Parameters to be monitored
can be all selected or only select one or two of them to check.After that, click Apply button on the lower right
corner. From the graph, we can see the trend of the refraction chart of the monitoring parameters. The ordinate
represents the value of the monitoring data, and the abscissa represents the time. Data which has been read for
more than 15 minutes will be automatically transferred from current statistics to history statistics.
Figure9-69 15-Minute Chart Data of OCh
History performance statistics of OCh also show history data in tabular form. Click on the table, the interface as
shown in the figure below appears:
Summary of Contents for M6500 Series
