FS M6500 Series, Configuration Manual

Page: 84 / 185

M6500 Series NE Configuration Manual
83
The client side port management interface is as shown in the figure below and the service type can be selected
in port mode.
Figure5-37 M6500-TMXP2 Client Side 100G Port Interface
 Client Side 40G Port
The current board mode is 100G; you need to change the board mode to 40G mode. Select NE
(10.32.130.220)-Slot2, click on "
Slot2
" and select "
Card Mode Configuration
" module on the right, as shown in
the figure below:
Figure5-38 Operation Steps of M6500-TMXP2 Card Configuration
After the window to select card mode appears, select M6500-40G-TMXP2.
Figure5-39 Selection of M6500-TMXP2 Card Mode
Apply M6500-40G-TMXP2 mode.