FS M6500 Series, Configuration Manual

Page: 90 / 185

M6500 Series NE Configuration Manual
89
Select NE-Slot 2, click on “ Port 3 ”and select“ Port Management ”on the right, and then select OCh (OTU4) as the
port mode. In“ OTU4 ”interface under“ Port Configuration ”, select “ FEC type ”to view the configuration. There are in
all 7 FEC modes for TMXP2 line side, which are respectively
G709FEC/SDFEC1/SDFEC2/SDFEC3/SDFEC1_Non-diff/SDFEC2_Non-diff/SDFEC3_Non-diff. SDFEC3 is the default
mode, as shown in the figure below:
Figure5-51 FEC Configuration of M6500-TMXP2 Line Side Port
 Client Side 100G Port
Select NE-Slot 2, click on “ Port1 ”and select“ Port Management ”on the right”, and then select OTU4 as the port
mode. In“ OTU4 ” interface under“ Port Configuration ”, select “ FEC type ”to view the configuration. There is only
one default FEC mode for 100G client side, which is G709FEC, as shown in the figure below:
Figure5-52 FEC Configuration of M6500-TMXP2 Client Side 100G Port

Client Side 40G Port
Select NE-Slot 2, click on“ Port1 ”and select“ Port Management ”on the right, and then select OTU3 as the port
mode. In“ OTU3 ” interface under “ Port Configuration ”, select “ FEC type ”to view the configuration. There are in all 4
FEC modes for the client side 40G, which are respectively No FEC/G709FEC/I.4EFEC/I.7EFEC. G709FEC is the
default mode, the configuration is as shown in the figure below: