FS M6500 Series, Configuration Manual

Page: 163 / 185

M6500 Series NE Configuration Manual
162
running time counts from 0. After 86400 seconds, the suspicious interval marker will become trustworthy and
the running time counts again from 0. The last 24-hour data automatically becomes the history data, as shown
in the figure below:
Figure9-48 24-Hour SDH Monitoring Data
9.2.5.3. SDH Regeneration Segment Monitoring Data Reset
When the current SDH monitoring data needs to be reset and to restart the monitoring, the 15-minute and
24-hour operation steps are the same. Taking 15-minute operation as an example, you can click on Reset
behind each piece of monitoring record to perform resetting of a single piece of monitoring record, or you can
select the first box to do batch resetting, as shown in the figure below.
Figure9-49 SDH Regeneration Segment Reset
Then click on Apply button, as shown in the figure, it will show that the operation is successful. After that, click
on Refresh button to refresh the whole page. At this time, the suspicious interval marker will become from
untrustworthy to trustworthy and the running time counts again from 0. All the data is updated to the latest
time to read the value.
Figure9-50 SDH Regeneration Segment Successfully Reset